QWX2000-12D4

QWX2000-12D4

$199.99

Download Manual

 

California Prop 65 WARNING: Cancer and Reproductive Harm – www.p65warnings.ca.gov

Don't have a PayPal account? No problem, just click the yellow button and a small window will pop up. Scroll down and you'll see "Pay with Debit or Credit Card."
Categories: ,
000

Our engineers have designed this subwoofer from the ground up to shake the ground up. The foam surround along with the die-cast aluminum vented basket allow for maximum excursion while the protective magnet cover gives the woofer a rugged yet stylish appearance.

  • 2″ BASV High Temperature Voice Coil
  • Compressed Paper Cone
  • Double Stitched Foam Surround
  • Heavy Gauge Stamped Steel Basket
  • Proprietary Full Round PVC Gasket
  • Heavy Gauge Spring Terminals
  • Protective Magnet Cover

Physical Structure

Outside Diameter (A) 12.77″ (324.5mm)
Cutout Diameter (B) 10.94″ (278mm)
Mounting Depth (C) 5.93″ (150.8mm)
General Specifications
Structure 12″ (30.48cm) Woofer
Dynamic Power Handling 2000 Watts
Nominal Power Handling 1000 Watts
Impedance Dual 4Ω Voice Coil
Parameters
Sound Pressure Level (SPL) 86dB
XMAX 13mm
Resonant Frequency (fs) 35.557 Hz
Compliance (Cms) 118.397 um/N
D.C. Voice Coil Resistance (Re) 3.6Ω + 3.6Ω
Mechanical Quality Factor (Qms) 4.522
Electrical Quality Factor (Qes) 0.769
Total Quality Factor (Qts) 0.657
Mass of Diaphragm/Coil (Mms) 169.219 g
Force Factor (Bl) 8.867

Recommended Enclosures

Woofer Cut-out 10.94″ (278mm)
Mounting Depth 5.93″ (150.8mm)
Sealed Box 1.125 ft3 (31.85L)
Vented Box 1.59 ft3 (45.023L)
? Port Diameter 12.57 in (31.92 cm)
? Port length 16″ (40.64 cm)
? Tuning 36 Hz
Dynamic Power 2000 Watts
Nominal Power 1000 Watts

Wiring Configuration

You can change the wiring configuration of your speakers (Series, Parallel and Series / Parallel) to match the impedance loads that maximizes the power output of you amplifier. Wiring the same woofer or multiple woofers in these three different wiring configurations will result in different impedance loads.

Series: Is the method of wiring of alternate positive with negative terminals (string method) (Illustration below)

Parallel:Is the method of wiring where you wire match 2 speaker terminals with positive to positive terminal and negative to negative. (Illustration below)

Series/Parallel: This configuration is a combination of both series and parallel. We recommend series for the terminal and parallel for the leads to amp. (Illustration below).

4 Ohm DVC Configuration

Related products